Briggs & Stratton 040229, 040212 Access Doors, To Open an Access Door, To Close an Access Door

INSTALLATION

Access Doors

The Home Generator System is equipped with an enclosure that has three access doors (Figure 3).The doors are named for a significant component located behind them. Starting with the side that has the fuel connection and proceeding clockwise, the doors are named:

•Oil Fill door

•Control Panel door

•Oil Drain door

Each Home Generator System is equipped with two identical keys.These keys fit the locks that secure the access doors.

WARNING

Running engines produce heat.Temperature of exhaust port and nearby areas can reach or exceed 600°F (316°C).

Severe burns can occur on contact.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

To Open an Access Door:

1.Insert key into lock of access door you wish to open and turn one quarter turn counterclockwise.

2.Grasp door’s handle and turn one quarter turn counterclockwise to open. Remove key.

To Close an Access Door:

1. Close door and turn doors handle one quarter of a turn clockwise.

2. Insert key into lock of access door and turn one quarter turn clockwise. Remove key.

Figure 3 — Enclosure Access Doors

									Exhaust
									Port
Control					Door	Oil	Drain		Bulkhead
				Fill				Door
	Panel		Oil
		Door							Exhaust
			Fuel Inlet

11