FEATURES AND CONTROLS
SYSTEM CONNECTIONS
Compare this illustration with your generator to familiarize yourself with the location of these important connections:
10 Pole Connector
Fault Contacts
Transfer Switch
Communication
Remote LED Output
+12 Volt DC, .5 Amp Output
2 Pole Connector
240 Volt Utility
Wiring for the 2 Pole Connector:
240 Volt Utility — Use to hook up the 240V utility leads from the transfer switch to the generator.
Wiring for the 10 Pole Connector:
Fault Contacts — Use NO, COM and NC to hook up a siren, light, etc. to alert you in case of a fault. Contacts reverse state upon a fault condition.
Remote LED Output — Use this to hook up the remote LED supplied with the generator. The remote LED will turn on and off in a series of blinks if certain faults are detected in the generator.
Transfer Switch Communication — Use TxRx and TxRx GND to transfer switch and optional wireless StatStation™ to monitor generator functions.
+12 Volt DC, .5 Amp Output — Internal power supply.
12