Konica Minolta 752 When Start Timer is set to on, Touch OK to perform Operation OFF proce- dure

Page 21

3-3.Shut-down Operation

•When START TIMER is set to ON;

If START TIMER is set to ON, when you touch [OPERATION OFF] on the normal screen, the time at which the DRYPRO goes into the READY status for the next time appears on the conﬁrm screen on the right.

(1)Touch [OK] to perform OPERATION OFF proce- dure.

Touching [CANCEL] will go back to the normal screen. When START TIMER is set to ON, the device will not turn off, and go into the standby mode.

In the standby mode, the backlight of the control panel fades out with the time to go to READY for next time displayed. [CANCEL] will appear after a lapse of certain time after the device goes into the standby mode.

IMPORTANT

•Touch [CANCEL] on the screen on which the standby mode message appears if you wish to make printing in the standby mode. The con- ﬁrm message on the lower-right appears, touch [OK] to restart the device.

•[CANCEL] will appear after a lapse of certain time (approx. 2 minutes) after the device goes into the standby mode.

•When you use the START TIMER function, leave the breaker of the device ON after OPERATION OFF procedure is made. (Refer to page 18 for details on how to set the START TIMER function.)

Operation OFF message

(Start Timer ON)

Standby mode message

Restart conﬁrm message

DRYPRO MODEL 752 Operation Manual Ver.0.12 2002.7 9

Image 21

Contents Drypro model Blank DRY Laser Imager Drypro Model Operation environment IntroductionImaging environment Sorter LiS-752 is optional deviceSymbol mark Descriptions of symbol mark Descriptions of Symbol MarkDescriptions on warning caution label Descriptions on Warning LabelPage Front Rear Be sure to ground the device well Safety CautionPlug the power cable completely Be careful not to trip over the power cable to damage itDo not operate the switches with wet hands When unplugging the power cable, do not pull it Precaution Disposal PrecautionPrecaution on Installation Location Name of Each Component Main BodyFront View Rear View Sorter LiS-752 option Structure How To Operate Control PanelDescription on screen Start-up Operation Power saving mode Shut-down Operation When Start Timer is not set to onTouch OK to perform Operation OFF proce- dure When Start Timer is set to onShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Function of Maintenance Mode Maintenance ModeStart-up maintenance mode Switching Maintenance ModeShut-down maintenance mode Touch MaintenanceSetting Start Timer Function How To Operate Maintenance ModeSetting Date/Time Time SET Touch Previous Print on the maintenance menu screen Re-printing Printed Page Previous PrintTouch on the upper part of the screen Touch the box on the right of Copy and input the print count Density Touch a LUT name you wish to apply for printingMIN Density Touch StoreCalibrating Density Calibration Calibration Touch Calibration on the maintenance menu screenAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Opening/closing front cover Cover Open Touch Cover Open on the maintenance menu screenTouch Exit Adjusting control panel Panel AdjustHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Touch Film Data on the maintenance menu screen Conﬁrming and setting ﬁlm count dataConﬁrming ﬁlm count data Weekly ﬁlm count Monthly ﬁlm countTouch Film Data Setup on the ﬁlm count data screen Setting ﬁlm count preferenceTouch Print Condition on the maintenance menu screen Setting print preferencePrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select Sets the format of date to be printed on the ﬁlm After the settings are complete, touch ExitTouch the user LUT name to be set on the LUT select screen Setting user LUTTouch LUT Library Touch the name of the LUT to be appliedTouch User LUT on the maintenance menu screen Creating user LUTTouch Data on the lower part of the screen Conﬁrming the LUT curve Touch Edit on the LUT data screenTouch Power Save on the Maintenance Menu screen Setting power saving modeHow To Operate Maintenance Mode Troubleshooting Error Display and RemedyError Code Description Remedy Error Display and Remedy Resetting Errors Touch Error Queue When an error cannot be resetRe-starting When Cover Open is displayed When Sorter Cover is displayedRemoving Jam Press in the tray until it locks Jam in trayFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Periodical Maintenance and Inspection Service and MaintenanceOuter cover of the main unit Inside of main unitBefore replacing the FILTER, be sure to touch FIL Replacing FilterService and Maintenance Schedule Other service and maintenanceServicing by a user Conﬁrming maintenance and maintenance display Drypro Model SpeciﬁcationsSorter Option Speciﬁcations Time zone and code No. table AppendixHandling and Storage of Developed Film Handling and Storage of Unexposed FilmBlank Blank