Konica Minolta 752 operation manual Touch Store, MIN Density

Page 35

4-3.How To Operate Maintenance Mode

(11)Select NEGA/POSI by touching [NEGA] or [POSI].

(12)Touch on the upper part of the screen.

The print preference set screen (3/3) will appear.

(13)Touch the key on the right of the setting item, then touch the numeric keys to set the following items.

MAX DENSITY : Sets the maximum density of an image.

MIN DENSITY	: Sets the minimum density of an image.
Lo	: (Not used for the current version.)
La	: (Not used for the current version.)
SORTER	: Sets the bin in the sorter (option) into
	which the ﬁlm is discharged.

(14)Touch [STORE].

The printing data on the speciﬁed page will be queued and the print page set screen will re-appear.

If the speciﬁed page has been already deleted, "PREVIOUS PAGE ERROR" is displayed.

(15)If there are other data to be printed, repeat from Step (4) to set the print page.

If you wish to print the data from another diagnostic device,

touch to display the PREVIOUS PRINT screen, and repeat from Step (2).

(16)To complete the settings of re-printing, touch [EXIT] to return to the MAINTENANCE MENU screen.

(17)Touch [EXIT] to end the maintenance mode.

When the normal screen re-appears, the data on the speciﬁed page will be printed out.

DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 23

Image 35

Contents Drypro model Blank DRY Laser Imager Drypro Model Sorter LiS-752 is optional device IntroductionOperation environment Imaging environmentSymbol mark Descriptions of symbol mark Descriptions of Symbol MarkDescriptions on warning caution label Descriptions on Warning LabelPage Front Rear Be sure to ground the device well Safety CautionDo not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode Shut-down Operation When Start Timer is not set to onTouch OK to perform Operation OFF proce- dure When Start Timer is set to onShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Function of Maintenance Mode Maintenance ModeTouch Maintenance Switching Maintenance ModeStart-up maintenance mode Shut-down maintenance modeSetting Start Timer Function How To Operate Maintenance ModeSetting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Density Touch a LUT name you wish to apply for printingMIN Density Touch StoreCalibrating Density Calibration Calibration Touch Calibration on the maintenance menu screenAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Opening/closing front cover Cover Open Touch Cover Open on the maintenance menu screenTouch Exit Adjusting control panel Panel AdjustHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Weekly ﬁlm count Monthly ﬁlm count Conﬁrming and setting ﬁlm count dataTouch Film Data on the maintenance menu screen Conﬁrming ﬁlm count dataTouch Film Data Setup on the ﬁlm count data screen Setting ﬁlm count preferenceTouch Print Condition on the maintenance menu screen Setting print preferencePrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select Sets the format of date to be printed on the ﬁlm After the settings are complete, touch ExitTouch the name of the LUT to be applied Setting user LUTTouch the user LUT name to be set on the LUT select screen Touch LUT LibraryTouch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Conﬁrming the LUT curve Touch Edit on the LUT data screenTouch Power Save on the Maintenance Menu screen Setting power saving modeHow To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors Touch Error Queue When an error cannot be resetRe-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Press in the tray until it locks Jam in trayFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Inside of main unit Service and MaintenancePeriodical Maintenance and Inspection Outer cover of the main unitBefore replacing the FILTER, be sure to touch FIL Replacing FilterServicing by a user Service and Maintenance ScheduleOther service and maintenance Conﬁrming maintenance and maintenance display Drypro Model SpeciﬁcationsSorter Option Speciﬁcations Time zone and code No. table AppendixHandling and Storage of Developed Film Handling and Storage of Unexposed FilmBlank Blank