Konica Minolta 752 operation manual Touch ON/OFF Line to switch into OFF Line

Page 74

5-4.When Film Fails to be Loaded

(5)Open the light shield cover of the tray.

(6)Remove the ﬁlm with the package from the tray.

Light shield cover

(7)Push the ﬁlm and resin tray to the back of the pack- age.

(8)Insert the trailing edge of the package between the retaining plate and the taking-up shaft in the same manner as that of loading the ﬁlm, and close the light shield cover completely.

After closing the light shield cover, carry the tray out of a dark room.

(9)Put the tray back to the rail of the main unit, and press in the tray until it locks.

The normal screen will re-appear after a while when the mes- sage of "PLEASE WAIT" appears.

(10)Touch [ON/OFF LINE] to switch into OFF LINE.

Film

Light shield cover

Retaining plate

(11)Touch [MAINTENANCE] to display the mainte- nance menu screen.

(12)Touch [FILMSET RETRY].

The message for selecting the tray will appear.

62 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6

Image 74

Contents Drypro model Blank DRY Laser Imager Drypro Model Imaging environment IntroductionOperation environment Sorter LiS-752 is optional deviceDescriptions of Symbol Mark Symbol mark Descriptions of symbol markDescriptions on Warning Label Descriptions on warning caution labelPage Front Rear Safety Caution Be sure to ground the device wellDo not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode When Start Timer is not set to on Shut-down OperationWhen Start Timer is set to on Touch OK to perform Operation OFF proce- dureShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Maintenance Mode Function of Maintenance ModeShut-down maintenance mode Switching Maintenance ModeStart-up maintenance mode Touch MaintenanceHow To Operate Maintenance Mode Setting Start Timer FunctionSetting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Touch a LUT name you wish to apply for printing DensityTouch Store MIN DensityCalibration Touch Calibration on the maintenance menu screen Calibrating Density CalibrationAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Touch Cover Open on the maintenance menu screen Opening/closing front cover Cover OpenAdjusting control panel Panel Adjust Touch ExitHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Conﬁrming ﬁlm count data Conﬁrming and setting ﬁlm count dataTouch Film Data on the maintenance menu screen Weekly ﬁlm count Monthly ﬁlm countSetting ﬁlm count preference Touch Film Data Setup on the ﬁlm count data screenSetting print preference Touch Print Condition on the maintenance menu screenPrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select After the settings are complete, touch Exit Sets the format of date to be printed on the ﬁlmTouch LUT Library Setting user LUTTouch the user LUT name to be set on the LUT select screen Touch the name of the LUT to be appliedTouch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Touch Edit on the LUT data screen Conﬁrming the LUT curveSetting power saving mode Touch Power Save on the Maintenance Menu screenHow To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors When an error cannot be reset Touch Error QueueRe-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Jam in tray Press in the tray until it locksFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Outer cover of the main unit Service and MaintenancePeriodical Maintenance and Inspection Inside of main unitReplacing Filter Before replacing the FILTER, be sure to touch FILServicing by a user Service and Maintenance ScheduleOther service and maintenance Conﬁrming maintenance and maintenance display Speciﬁcations Drypro ModelSorter Option Speciﬁcations Appendix Time zone and code No. tableHandling and Storage of Unexposed Film Handling and Storage of Developed FilmBlank Blank