Konica Minolta 752 Switching Maintenance Mode, Start-up maintenance mode, Touch Maintenance

Page 29

4-2.Switching Maintenance Mode

4-2. Switching Maintenance Mode

"Start-up maintenance mode

(1)Touch [ON/OFF LINE] on the normal screen to switch into OFF LINE.

ON LINE displayed on the upper-left corner of the screen changes to OFF LINE, and [MAINTENANCE] appears on the lower-right corner of the screen.

(2)Touch [MAINTENANCE].

The maintenance menu (MAINTENANCE) screen listing the maintenance items appears.

CAUTION

When touching [MAINTENANCE] during print, "NOW PRINTING PLEASE WAIT" is displayed and the maintenance screen does not appear until the printing operation is complete.

The data queued for printing will be printed out after the device exits from the maintenance mode.

(3)Touch the key of an item to execute.

The set screen or messages that correspond to the selected item appears.

For details on how to operate each maintenance item, refer to the following pages.

"Shut-down maintenance mode

Touching [EXIT] on the maintenance menu screen will exit the device from the maintenance mode, and return to the normal screen.

•When the normal screen re-appears, touch [ON/OFF LINE] to go back to OFF LINE.

•When PREVIOUS PRINT, CALIBRATION, or TEST PRINT is set, the pint data for those will be printed out after the device exits the maintenance mode.

DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 17

Image 29

Contents Drypro model Blank DRY Laser Imager Drypro Model Operation environment IntroductionImaging environment Sorter LiS-752 is optional deviceSymbol mark Descriptions of symbol mark Descriptions of Symbol MarkDescriptions on warning caution label Descriptions on Warning LabelPage Front Rear Be sure to ground the device well Safety CautionDo not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode Shut-down Operation When Start Timer is not set to onTouch OK to perform Operation OFF proce- dure When Start Timer is set to onShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Function of Maintenance Mode Maintenance ModeStart-up maintenance mode Switching Maintenance ModeShut-down maintenance mode Touch MaintenanceSetting Start Timer Function How To Operate Maintenance ModeSetting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Density Touch a LUT name you wish to apply for printingMIN Density Touch StoreCalibrating Density Calibration Calibration Touch Calibration on the maintenance menu screenAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Opening/closing front cover Cover Open Touch Cover Open on the maintenance menu screenTouch Exit Adjusting control panel Panel AdjustHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Touch Film Data on the maintenance menu screen Conﬁrming and setting ﬁlm count dataConﬁrming ﬁlm count data Weekly ﬁlm count Monthly ﬁlm countTouch Film Data Setup on the ﬁlm count data screen Setting ﬁlm count preferenceTouch Print Condition on the maintenance menu screen Setting print preferencePrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select Sets the format of date to be printed on the ﬁlm After the settings are complete, touch ExitTouch the user LUT name to be set on the LUT select screen Setting user LUTTouch LUT Library Touch the name of the LUT to be appliedTouch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Conﬁrming the LUT curve Touch Edit on the LUT data screenTouch Power Save on the Maintenance Menu screen Setting power saving modeHow To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors Touch Error Queue When an error cannot be resetRe-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Press in the tray until it locks Jam in trayFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Periodical Maintenance and Inspection Service and MaintenanceOuter cover of the main unit Inside of main unitBefore replacing the FILTER, be sure to touch FIL Replacing FilterServicing by a user Service and Maintenance ScheduleOther service and maintenance Conﬁrming maintenance and maintenance display Drypro Model SpeciﬁcationsSorter Option Speciﬁcations Time zone and code No. table AppendixHandling and Storage of Developed Film Handling and Storage of Unexposed FilmBlank Blank