Konica Minolta 752 operation manual Sorter Option Speciﬁcations

Page 82

Speciﬁcations

Border		:	Black or Clear
Stamp		: Printed in one line on ﬁlm (selectable among upper, lower, right, and left parts
			on ﬁlm)
Density Correction		: Included in the device
Start Timer		:	Date/Time
Safety Standards		:	IEC60601- 1- 2, IEC60601- 1, IEC60825
Remarks		: KONICA DRYPRO 752 is produced in factories that have been certiﬁed to be
			in compliance with the ISO9001:1996, ISO13488:1996, and EN40601:1996
			quality control standards, as well as with the medical device directive FDA
			Premarket Notiﬁcation 510(k) and GMP.
Accessories		: Power cable, Cutter (for ﬁlm loading) x 2, Operation manual, A set of ﬁlm
			size changing components
Optional Equipment		: Konica Printlink (II), FILTER, Sorter, UPS (Lead rechargeable battery)

	Sorter (Option) Speciﬁcations
	Model name		: LiS-752
	Dimensions (W x D x H) :			376 x 628 x 1695 mm (14.8" x 24.7" x 66.7")
	Weight		:	Approx. 71kg (156 lbs.)
	Power source		:	Supplied by DRYPRO
	Number of bins		:	5
	Film size		: 14" x 17", 14" x 14", 14" x 11"
	No. of ﬁlm stored		:	50 sheets (max.)/bin

- The speciﬁcations above subject to change without a notice.

70 DRYPRO MODEL 752 Operation Manual USA Ver.0.12 2003.5

Image 82

Contents Drypro model Blank DRY Laser Imager Drypro Model Imaging environment IntroductionOperation environment Sorter LiS-752 is optional deviceDescriptions of Symbol Mark Symbol mark Descriptions of symbol markDescriptions on Warning Label Descriptions on warning caution labelPage Front Rear Safety Caution Be sure to ground the device wellBe careful not to trip over the power cable to damage it Plug the power cable completelyDo not operate the switches with wet hands When unplugging the power cable, do not pull it Disposal Precaution PrecautionPrecaution on Installation Location Main Body Name of Each ComponentFront View Rear View Sorter LiS-752 option Structure Control Panel How To OperateDescription on screen Start-up Operation Power saving mode When Start Timer is not set to on Shut-down OperationWhen Start Timer is set to on Touch OK to perform Operation OFF proce- dureShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Maintenance Mode Function of Maintenance ModeShut-down maintenance mode Switching Maintenance ModeStart-up maintenance mode Touch MaintenanceHow To Operate Maintenance Mode Setting Start Timer FunctionSetting Date/Time Time SET Re-printing Printed Page Previous Print Touch Previous Print on the maintenance menu screenTouch on the upper part of the screen Touch the box on the right of Copy and input the print count Touch a LUT name you wish to apply for printing DensityTouch Store MIN DensityCalibration Touch Calibration on the maintenance menu screen Calibrating Density CalibrationAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Touch Cover Open on the maintenance menu screen Opening/closing front cover Cover OpenAdjusting control panel Panel Adjust Touch ExitHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Conﬁrming ﬁlm count data Conﬁrming and setting ﬁlm count dataTouch Film Data on the maintenance menu screen Weekly ﬁlm count Monthly ﬁlm countSetting ﬁlm count preference Touch Film Data Setup on the ﬁlm count data screenSetting print preference Touch Print Condition on the maintenance menu screenPrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select After the settings are complete, touch Exit Sets the format of date to be printed on the ﬁlmTouch LUT Library Setting user LUTTouch the user LUT name to be set on the LUT select screen Touch the name of the LUT to be appliedCreating user LUT Touch User LUT on the maintenance menu screenTouch Data on the lower part of the screen Touch Edit on the LUT data screen Conﬁrming the LUT curveSetting power saving mode Touch Power Save on the Maintenance Menu screenHow To Operate Maintenance Mode Error Display and Remedy TroubleshootingError Code Description Remedy Error Display and Remedy Resetting Errors When an error cannot be reset Touch Error QueueRe-starting When Sorter Cover is displayed When Cover Open is displayedRemoving Jam Jam in tray Press in the tray until it locksFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Outer cover of the main unit Service and MaintenancePeriodical Maintenance and Inspection Inside of main unitReplacing Filter Before replacing the FILTER, be sure to touch FILOther service and maintenance Service and Maintenance ScheduleServicing by a user Conﬁrming maintenance and maintenance display Speciﬁcations Drypro ModelSorter Option Speciﬁcations Appendix Time zone and code No. tableHandling and Storage of Unexposed Film Handling and Storage of Developed FilmBlank Blank