Konica Minolta 752 operation manual How To Operate, Control Panel, Description on screen

Page 17

3. How To Operate

The operation, control and settings of this device can be made by using the control panel located on the main unit. The following shows the operating procedures.

3-1. Control Panel

"Description on screen

(1)

(3)

(12)

(10)

(13)

(6)

(1)ON LINE/OFF LINE Indication

Displays the ON LINE/OFF LINE status of the device.

(2)Message Column

Displays the status of the device. READY . . . . . . . . . . Ready for print PRINTING . . . . . . . In print process WARMINGUP . . . . During warming-up MAINTENANCE . . Maintenance mode

(3)Information of Loaded Film

Displays film type, size, number of remaining films in the upper and lower trays respectively.

Size

Film type

No. of remaining films

14 x 17

B (SD-P)

0-125

14 x 14

C (SD-PC)

 

11 x 14

DRB (DR-P)

 

 

 

 

(4)PRINT QUEUE

Displays the number of films waiting to be printed.

(2)

(11)

(8)

(4)

(9)

(7)

(5)

(8) FILM SET / TRAY OPEN / CALIBRATION Key

The FILM SET key opens the tray when the film tray becomes empty. (Refer to page 11 for details.)

The TRAY OPEN key opens the tray when a film jam occurs in the tray. (For removing film jams, refer to page 52.)

The CALIBRATION key is displayed to prompt you to perform density correction when [MESS] is selected in the WEEKLY CALIBRATION settings. (Refer to page 24 for calibration.)

(9)ERROR RESET Key

Resets the device when an error occurs. This key appears only when an error occurs. (Refer to page 49 for error reset.)

(10)COVER OPEN Key

Opens the front cover when film jams occur. This key appears only when film jams occur. (For removing film jams, refer to page 52.)

(11)FILTER EXCHANGE Key

This key appears when the FILTER has to be replaced. The pro- cedure for replacing the FILTER appears. (For replacing the FILTER, refer to page 66.)

(5)OPERATION OFF Key

Turns the power OFF and stops the operation.

(6)ON/OFF LINE Key

Switches connected/disconnected (ON LINE/OFF LINE) to/from the diagnostic device for communica- tions.

(7)MAINTENANCE Key

Switches to the maintenance mode to change the set- tings and perform the inspection. This key appears only when the device is in the OFF LINE status. (Refer to page 16 for details.)

(12)SORTER COVER Key

Displayed when a film jam occurs in the sorter (option). Dis- plays the procedure for removing film jams. (For removing film jams, refer to page 52.)

(13)PREVENTIVE MNT Key

Displayed when the periodical maintenance inspection period comes. (Refer to page 67 for periodical maintenance inspec- tion.)

DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6 5

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Drypro model Blank DRY Laser Imager Drypro Model Operation environment IntroductionImaging environment Sorter LiS-752 is optional deviceSymbol mark Descriptions of symbol mark Descriptions of Symbol MarkDescriptions on warning caution label Descriptions on Warning LabelPage Front Rear Be sure to ground the device well Safety CautionDo not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode Shut-down Operation When Start Timer is not set to onTouch OK to perform Operation OFF proce- dure When Start Timer is set to onShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Function of Maintenance Mode Maintenance ModeStart-up maintenance mode Switching Maintenance ModeShut-down maintenance mode Touch MaintenanceSetting Start Timer Function How To Operate Maintenance ModeSetting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Density Touch a LUT name you wish to apply for printingMIN Density Touch StoreCalibrating Density Calibration Calibration Touch Calibration on the maintenance menu screenAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Opening/closing front cover Cover Open Touch Cover Open on the maintenance menu screenTouch Exit Adjusting control panel Panel AdjustHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the confirm message Cold Start Touch Film Data on the maintenance menu screen Confirming and setting film count dataConfirming film count data Weekly film count Monthly film countTouch Film Data Setup on the film count data screen Setting film count preferenceTouch Print Condition on the maintenance menu screen Setting print preferencePrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select Sets the format of date to be printed on the film After the settings are complete, touch ExitTouch the user LUT name to be set on the LUT select screen Setting user LUTTouch LUT Library Touch the name of the LUT to be appliedTouch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Confirming the LUT curve Touch Edit on the LUT data screenTouch Power Save on the Maintenance Menu screen Setting power saving modeHow To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors Touch Error Queue When an error cannot be resetRe-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Press in the tray until it locks Jam in trayFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Periodical Maintenance and Inspection Service and MaintenanceOuter cover of the main unit Inside of main unitBefore replacing the FILTER, be sure to touch FIL Replacing FilterServicing by a user Service and Maintenance ScheduleOther service and maintenance Confirming maintenance and maintenance display Drypro Model SpecificationsSorter Option Specifications Time zone and code No. table AppendixHandling and Storage of Developed Film Handling and Storage of Unexposed FilmBlank Blank
Top Page Image Contents