Konica Minolta 752 operation manual Touch Edit on the LUT data screen, Conﬁrming the LUT curve

Page 56

4-3.How To Operate Maintenance Mode

On the LUT data screen, the values (density x 100) of 16 points of the LUT curve are displayed.

When inputting the digital value of the LUT data (12-bit digital value converted from the density of each point: 0000 - 4095), touch [DIGITAL] on the lower part of the screen. The digital data of 16 points of the LUT curve will appear.

Touching [GRAPH] will allow you to conﬁrm a graph of the selected LUT curve.

(6)Touch [EDIT] on the LUT data screen.

The LUT data input screen (DENSITY) will appear.

(7)Touch the value of the point to be changed, and enter a value with the numeric keys on the lower part of the screen.

By touching [DIGITAL] / [DENSITY] on the lower part of the screen, you can input the digital value of the density or the den- sity value (density x 100).

(8)After the settings are complete, touch [OK].

The setting becomes valid, and the user LUT select screen re- appears.

If you wish to cancel the settings, touch [CANCEL].

•Conﬁrming the LUT curve

Of the screens of "USER LUT" and "PRINT CONDITION", the screen for selecting or creating the LUT can display the graph showing the characteristics of the LUT being selected or created by touching [GRAPH] displayed on the screen.

•On the graph display screen, touching [DIGITAL] or [DENSITY] switches between the digital value and the density value (density x 100) for showing the vertical axis of the graph.

•Touching [EXIT] on the graph display screen will return to the original screen.

•The graph display screen only allows you to conﬁrm the LUT curve. You cannot edit the LUT displayed on the screen.

44 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6

Image 56

Contents Drypro model Blank DRY Laser Imager Drypro Model Introduction Operation environmentImaging environment Sorter LiS-752 is optional deviceDescriptions of Symbol Mark Symbol mark Descriptions of symbol markDescriptions on Warning Label Descriptions on warning caution labelPage Front Rear Safety Caution Be sure to ground the device wellDo not operate the switches with wet hands Plug the power cable completelyBe careful not to trip over the power cable to damage it When unplugging the power cable, do not pull it Precaution on Installation Location PrecautionDisposal Precaution Front View Name of Each ComponentMain Body Rear View Sorter LiS-752 option Structure Description on screen How To OperateControl Panel Start-up Operation Power saving mode When Start Timer is not set to on Shut-down OperationWhen Start Timer is set to on Touch OK to perform Operation OFF proce- dureShut-down Operation Film Loading Resin tray Seals at the edges of the package Push the tray to the back until it is locked Film Loading Maintenance Mode Function of Maintenance ModeSwitching Maintenance Mode Start-up maintenance modeShut-down maintenance mode Touch MaintenanceHow To Operate Maintenance Mode Setting Start Timer FunctionSetting Date/Time Time SET Touch on the upper part of the screen Touch Previous Print on the maintenance menu screenRe-printing Printed Page Previous Print Touch the box on the right of Copy and input the print count Touch a LUT name you wish to apply for printing DensityTouch Store MIN DensityCalibration Touch Calibration on the maintenance menu screen Calibrating Density CalibrationAutomatic calibration Test Print Selected user LUT name will be highlighted Touch OK How to control density Touch Cover Open on the maintenance menu screen Opening/closing front cover Cover OpenAdjusting control panel Panel Adjust Touch ExitHow To Operate Maintenance Mode Clearing queued print data Queue Clear Touch OK on the conﬁrm message Cold Start Conﬁrming and setting ﬁlm count data Touch Film Data on the maintenance menu screenConﬁrming ﬁlm count data Weekly ﬁlm count Monthly ﬁlm countSetting ﬁlm count preference Touch Film Data Setup on the ﬁlm count data screenSetting print preference Touch Print Condition on the maintenance menu screenPrint preference set screen 3/7 will appear Select the item to be printed as the stamp with Stamp Select After the settings are complete, touch Exit Sets the format of date to be printed on the ﬁlmSetting user LUT Touch the user LUT name to be set on the LUT select screenTouch LUT Library Touch the name of the LUT to be appliedTouch Data on the lower part of the screen Touch User LUT on the maintenance menu screenCreating user LUT Touch Edit on the LUT data screen Conﬁrming the LUT curveSetting power saving mode Touch Power Save on the Maintenance Menu screenHow To Operate Maintenance Mode Error Code Description Remedy TroubleshootingError Display and Remedy Error Display and Remedy Resetting Errors When an error cannot be reset Touch Error QueueRe-starting Removing Jam When Cover Open is displayedWhen Sorter Cover is displayed Jam in tray Press in the tray until it locksFilm outlet cover Green edge Film jam between Hpro section and cooling/discharge section Removing Jam Film jam in sorter Sorter left cover Cutouts When Film Fails to be Loaded Touch ON/OFF Line to switch into OFF Line Touch OK Touch Exit to end the maintenance mode When Film Fails to be Loaded Service and Maintenance Periodical Maintenance and InspectionOuter cover of the main unit Inside of main unitReplacing Filter Before replacing the FILTER, be sure to touch FILServicing by a user Service and Maintenance ScheduleOther service and maintenance Conﬁrming maintenance and maintenance display Speciﬁcations Drypro ModelSorter Option Speciﬁcations Appendix Time zone and code No. tableHandling and Storage of Unexposed Film Handling and Storage of Developed FilmBlank Blank