4-3.How To Operate Maintenance Mode
"Setting print preference
The print preferences are set for each of the diagnostic devices. Follow the procedure below to set the print preferences.
(1)Touch [PRINT CONDITION] on the maintenance menu screen.
The print preference set screen (PRINT CONDITION) listing the name of the connected diagnostic devices will appear.
(2)Touch a name of the diagnostic device for which the print preferences are set.
The selected diagnostic device name will be highlighted. When 10 or more diagnostic devices are connected, touch [$] / [%] to scroll the list of the diagnostic device names.
(3)Touch 
on the upper part of the screen.
The LUT select screen (1/7) will appear.
(4)Touch a LUT name you wish to apply for printing.
The selected user LUT name will be highlighted.
For the LUT to be applied on the diagnostic device, you can select one from 8 user LUTs.
It is necessary to copy and set the user own LUT or the LUT recommended by Konica. (Refer to "Setting user LUT" on page 42.)
(5)Touch 
on the upper part of the screen.
The print preference set screen (2/7) will appear.
38 DRYPRO MODEL 752 Operation Manual Ver.0.11 2002.6