Hitachi CMP4121HDU user manual Contrast Adjustment, Size Selection, Input Signal Status Display

15 16

Contrast Adjustment

■ While the on-screen display system		, is not on display, press the remote
		12
controller SELECT button	or	to adjust the contrast.

•When you press these buttons, the status of contrast adjustment and the input horizontal

(H)and vertical (V) frequencies of the input signal will be displayed in a guidance image.

(For RGB input only)

•While the guidance is on display, press the

key to narrow the difference between darkness and brightness.

•While the guidance is on display, press the key to widen the difference between darkness and brightness.

•You can also adjust the contrast setting via the

on-screen display system . 13

•The contrast adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)

VIDEO

Remote

controllerCONTRAST : 100

Contrast setting

RGB

	CONTRAST : 100
H : **	. * kHz, V : **	. * Hz

Input horizontal	Input vertical
frequency	frequency

Adjustment status guidance

ENGLISH

Size Selection

■Each press on the SIZE button on the remote control switches the display size of the screen (or the display area) in the following order. The selected mode is

displayed in the lower part of the screen.

•RGB signal input				Remote
NORMAL	FULL		ZOOM	controller
				SIZE
•VIDEO signal input				FULL
4:3	PANORAM.		MOVIE1
	FULL	MOVIE2

• Depending on the signal type, sometimes it may not be possible to change screen size. Sometimes certain sizes may be unavailable.

Input Signal Status Display

■Press the remote controller RECALL button to display the status of input signals on the screen.

■Press the remote controller RECALL button once again to exit the screen display.

•The Menu will clear 5 seconds later.

Remote controller

RECALL

VIDEO

VIDEO2 [COMPONENT]

Input terminal name

RGB

RGB1 [D-SUB]

H : 46.5kHz, V : 60.0Hz

Input horizontal	Input vertical
frequency	frequency	11