Hitachi CMP4121HDU user manual Displays by Selecting the Display Size Video input, Panor, Full

•Composite / S signal (video1 input) and componet (SD1 480i) signal applicable for all size modes.

•For component (HD1: 480p) signals, the display mode is selectable among 4:3, MOVIE1, and FULL.

•For component (HD3: 1035i, 1080i, 720p) signals, the display mode is not selectable.

•If an S1 or S2 image is input from the S image of video1 , the S1 image would be set to

FULL, and the S2 image would be set to MOVIE1.

Displays by Selecting the DISPLAY SIZE (VIDEO input)

When you want to	Set the display	Input signal		Display	Remarks
	size to			screen
Play a 4:3 image in a 16:9 screen	4:3				Blanking occurs on both sides.
faithfully.
Play a 4:3 image in a 16:9 screen
with the height and width of the	PANOR.
		(4:3 signal)
middle of the screen enlarged on
	(Panoramic)
equal scales and with both sides
appearing somewhat enlarged.
The 16:9 VISTA size image in the					• The 4:3 image is called a letterbox
	MOVIE1				image.
4:3 image is faithfully reproduced					• In some cases, some slight
on the 16:9 screen.					blanking may remain at the top
			(Vista)		and bottom.
The 21:9 Cinema size image in the	MOVIE2				In some cases, some slight
4:3 image is expanded vertically on					blanking may remain at the top and
the 16:9 screen.					bottom.
			(Cinema)
Play a 4:3 image faithfully in a 16:9	FULL				* An image with an aspect ratio of
screen in the standard vertical size					16:9 shrunk horizontally to 4:3 to
and horizontally squeezed.*					display in a 4:3 screen
			(Squeez)

	Using a wide-screen monitor
	• This monitor has a screen mode selection feature. If an incompatible screen mode is
	selected to play certain software, such as a TV program, the image would appear different
	from the original. Take this into consideration when making screen mode choices.
TIPS	• Use of this monitor in its enlarged display mode with the wide feature enabled in coffee
	shops, hotels and other establishments for commercial or pubic viewing purposes could
	infringe on the copyright holder’s right protected by Copyright Law.
	• When a normal 4:3 image is displayed over the entire screen in the PANOR. mode, not the
	Wide mode, parts of the periphery of the image may disappear and/or appear distorted in
	some cases. Use the 4:3 mode to view images, which were created in 4:3 mode.
	This mode allows 4:3 content to be viewed without picture distortion.

ENGLISH

17