Sensors — the scanner has 3 (ultrasonic) multi-feed detection sensors, 1 (optical) paper path sensor and 1 (optical) paper present sensor. These sensors detect the presence of documents in the elevator tray and documents in the paper path during feeding and imaging.
Ultrasonic sensors
Paper
Path sensor
Paper Present sensor
Rear view
Power cord
connection
IEEE-1394 connection | Retainer clip |
Power cord connection — provides power to the scanner. The scanner is packed with six power cords. Choose the power cord appropriate for your location and connect it accordingly. Connect the power cord first to the scanner, then to the wall outlet.
FireWire (IEEE-1394) connection — before connecting the FireWire cable, be sure that power to the scanner is off. See the FireWire instructions packed with the scanner for connection instructions. After connection, place the cable in the retainer clip located above the connector.
