Kodak 6J7611A manual Running a transport cleaning sheet

Page 50

Running a transport cleaning sheet

1.Place a transport cleaning sheet in the elevator tray in landscape orientation.

2.Open the Scan Validation Tool by selecting Start>Programs> Kodak>Document Imaging>Scan Validation Tool. The Scan Validation Tool dialog box will be displayed.

3.Select TWAIN (or ISIS) for the Driver Types and Kodak Scanner: i600 or Kodak Scanner: i700 as the Driver and click OK.

The Scan Validation Tool dialog box will be displayed.

4.If Saved images to file is checked, uncheck it.

5.Click Start

6.After the transport sheet is scanned, turn it over and click Start again.

7.Open the pod and wipe the imaging guides with a lint-free cloth.

8.Close the pod and check your image quality.

A-61500 May 2010

5-11

Image 50

Contents I600/i700 Series Scanners Contents Appendix a Introduction Scanner models New features Scanner features Speed/capacity Throughput Safety information MsdsGas springs warning User precautionsEMC statements United StatesConnection Power systemAcoustic emission Getting Started For i700 Series Scanners only Microsoft Windows 7 64-bitMaking connections Scanner components Front view Stop/Pause and Start/Resume buttons Internal components Rear view Starting and stopping scanning Using the ScannerTurning the scanner on and off Automatically pausing and resuming the scanner Manually ending scanningDocument preparation MaterialsAdjusting the side guides and end stop Page Forward detent positions Exit deflector Adjusting the optional short document tray Automatic feeding Continuous feeding Manual feeding Press Start/ResumeCalibrating the scanner Image calibration Page Click Calibrate Page Enhanced Printer OverviewPrinter specifications Font sizeAccessing the Enhanced Printer Changing the printer position Replacing the ink cartridge Page Replacing the blotter strips Replacing the ink cartridge carrier Page Maintenance Cleaning frequency chart Cleaning tools and materials Supplies and accessories Ordering partsCleaning the output tray and elevator area Opening the podCleaning the drive rollers Cleaning the separation roller tiresCleaning the feed module tires Close the printer access cover 61500 May Cleaning the scanner transport area Cleaning the background strips Cleaning the imaging guidesPage Running a transport cleaning sheet Replacement procedures Replacing the feed module or feed module tiresPage Locking tab Locking tab Slot Replacing the separation roller or separation roller tires Replacing the imaging Replacing the preSeparation pad GuidesTroubleshooting Indicator lightsLed display Description Accessing the Operator Log Page Page I600 Series Scanners Message listing Enhanced Printer and Patch Readers for more Scanning Setup Guide for valid values Informational message. The pod was closed 61500 May Listing I600 Series ScannersNumerical Message 61500 May I700 Series Scanners Message listing Enhanced Printer and Patch Readers for more Scanning Setup Guide for valid values Informational message. The pod was closed 61500 May I700 Series Scanners 61500 May Problem solving Problem Possible SolutionMaintenance Appendix a Accessories Appendix B Specifications Scanner Type/SpeedKodak, 2010. All rights reserved. TM Kodak