Kodak 6J7611A manual Locking tab

Page 53

If you want to replace the tires, proceed as follows:

6.With one hand, press the locking tabs (one on each side) while holding the bottom housing with the other hand, pull the upper housing up and away from the rollers.

Locking tab

7.Remove one core assembly.

8.Replace each tire by sliding the tire off the core.

Core assembly

9.Install each new tire by gently pulling it over the core. IMPORTANT:Do not overstretch the tire; it may tear.

10.Replace the core assembly in the feed module.

11.Repeat the replacement procedure outlined above for the other core assembly.

5-14	A-61500 May 2010

Image 53

Contents I600/i700 Series Scanners Contents Appendix a Introduction Scanner models New features Scanner features Speed/capacity Throughput Msds Safety informationEMC statements User precautionsGas springs warning United StatesConnection Power systemAcoustic emission For i700 Series Scanners only Microsoft Windows 7 64-bit Getting StartedMaking connections Scanner components Front view Stop/Pause and Start/Resume buttons Internal components Rear view Starting and stopping scanning Using the ScannerTurning the scanner on and off Manually ending scanning Automatically pausing and resuming the scannerMaterials Document preparationAdjusting the side guides and end stop Page Forward detent positions Exit deflector Adjusting the optional short document tray Automatic feeding Press Start/Resume Continuous feeding Manual feedingCalibrating the scanner Image calibration Page Click Calibrate Page Overview Enhanced PrinterFont size Printer specificationsAccessing the Enhanced Printer Changing the printer position Replacing the ink cartridge Page Replacing the blotter strips Replacing the ink cartridge carrier Page Maintenance Cleaning frequency chart Cleaning tools and materials Ordering parts Supplies and accessoriesOpening the pod Cleaning the output tray and elevator areaCleaning the separation roller tires Cleaning the drive rollersCleaning the feed module tires Close the printer access cover 61500 May Cleaning the scanner transport area Cleaning the imaging guides Cleaning the background stripsPage Running a transport cleaning sheet Replacing the feed module or feed module tires Replacement proceduresPage Locking tab Locking tab Slot Replacing the separation roller or separation roller tires Separation pad Replacing the preReplacing the imaging GuidesIndicator lights TroubleshootingLed display Description Accessing the Operator Log Page Page I600 Series Scanners Message listing Enhanced Printer and Patch Readers for more Scanning Setup Guide for valid values Informational message. The pod was closed 61500 May Listing I600 Series ScannersNumerical Message 61500 May I700 Series Scanners Message listing Enhanced Printer and Patch Readers for more Scanning Setup Guide for valid values Informational message. The pod was closed 61500 May I700 Series Scanners 61500 May Problem Possible Solution Problem solvingMaintenance Appendix a Accessories Scanner Type/Speed Appendix B SpecificationsKodak, 2010. All rights reserved. TM Kodak