Kodak 6J7611A manual Troubleshooting, Indicator lights

Page 57

6 Troubleshooting

Indicator lights

This chapter provides:

•A description of the indicator lights located on the front of the scanner.

•Information about accessing the Operator Log.

•A problem solving chart.

•A message listing of possible errors you may encounter while using the scanner.

There are four indicator lights on the front of the scanner. See the table below for LED meanings:

LED indicators

	= green, Power
	= green, Ready
	= yellow, Jam/User correctable
	= red, Service/Error
	= indicates when an indicator is flashing

Led display	Description
	Scanner is in sleep or lamp saver mode.

To return to Ready state:

• press the Start/Resume button on the scanner or enable scanning from the host, or

•add paper to an empty elevator tray, or remove paper from the elevator tray.

Scanner is powered on and idle.

Scanner is idle and a document jam or multi-feed has been detected. See Operator Log for details.

Scanner is idle and has detected a user-correctable error.

See Operator Log for details.

Scanner is idle and has detected a hardware/software error. Cycle power on the scanner. If the condition persists, see the Operator Log for details. If the condition cannot be cleared, call Service.

A-61500 May 2010

6-1

Image 57

Contents I600/i700 Series Scanners Contents Appendix a Introduction Scanner models New features Scanner features Speed/capacity Throughput Msds Safety informationEMC statements User precautionsGas springs warning United StatesPower system Acoustic emissionConnection For i700 Series Scanners only Microsoft Windows 7 64-bit Getting StartedMaking connections Scanner components Front view Stop/Pause and Start/Resume buttons Internal components Rear view Using the Scanner Turning the scanner on and offStarting and stopping scanning Manually ending scanning Automatically pausing and resuming the scannerMaterials Document preparationAdjusting the side guides and end stop Page Forward detent positions Exit deflector Adjusting the optional short document tray Automatic feeding Press Start/Resume Continuous feeding Manual feedingCalibrating the scanner Image calibration Page Click Calibrate Page Overview Enhanced PrinterFont size Printer specificationsAccessing the Enhanced Printer Changing the printer position Replacing the ink cartridge Page Replacing the blotter strips Replacing the ink cartridge carrier Page Maintenance Cleaning frequency chart Cleaning tools and materials Ordering parts Supplies and accessoriesOpening the pod Cleaning the output tray and elevator areaCleaning the separation roller tires Cleaning the drive rollersCleaning the feed module tires Close the printer access cover 61500 May Cleaning the scanner transport area Cleaning the imaging guides Cleaning the background stripsPage Running a transport cleaning sheet Replacing the feed module or feed module tires Replacement proceduresPage Locking tab Locking tab Slot Replacing the separation roller or separation roller tires Separation pad Replacing the preReplacing the imaging GuidesIndicator lights TroubleshootingLed display Description Accessing the Operator Log Page Page I600 Series Scanners Message listing Enhanced Printer and Patch Readers for more Scanning Setup Guide for valid values Informational message. The pod was closed 61500 May I600 Series Scanners Numerical MessageListing 61500 May I700 Series Scanners Message listing Enhanced Printer and Patch Readers for more Scanning Setup Guide for valid values Informational message. The pod was closed 61500 May I700 Series Scanners 61500 May Problem Possible Solution Problem solvingMaintenance Appendix a Accessories Scanner Type/Speed Appendix B SpecificationsKodak, 2010. All rights reserved. TM Kodak