Adjusting the output tray for documents from 43 cm (17 in.) to 86 cm (34 in.)
Exit deflector
An output tray document extender is available for scanning documents from 43 cm (17 in.) to 86 cm (34 in.). Contact your Kodak Field Engineer
1.Lift the front of the output tray and pull it out of the detent position.
2.Place the output tray in the forward detent position.
3.Gently push down on the left side of the output tray until in snaps into place.
4.Remove the end stop.
5.Remove the exit deflector.
6.Install the output tray document extender.
The optional exit deflector aids in document stacking. When feeding long documents, it is suggested that the exit deflector be removed.
The exit deflector can be pulled out of place or pushed into place as required.