Replacing the ink cartridge carrier
6.Align the blotter strip in the transport channel. Be sure it is properly aligned before pressing the adhesive side into the channel.
7.Press the blotter strip firmly into the channel.
8.Repeat Steps 5 - 7 for the other blotter strip, if necessary.
9.Close the pod.
Under normal conditions, the ink cartridge carrier should not need to be replaced. If you do need to replace the carrier because it is broken or is not getting a good electrical connection, follow the instructions below.
Refer to Chapter 5, “Supplies and Consumables” for ordering information.
1.Remove the output tray and open the printer access cover.
2.Pull the ink cartridge carrier out of its slot.
3.Lift the tab to release the ink cartridge.