
Specifications
12.0SPECIFICATIONS
| Table 7 | UPS  | 
 | 
 | ||
| 
 | 
 | 
 | 
 | 
 | 
 | 
| 
 | Model Number | ||||
| 
 | 
 | 
 | 
 | 
 | 
 | 
| 
 | Model Rating | 4000W/5000VA | 4800W/6000VA | 7200W/8000VA | 9000W/10000VA | 
| 
 | 
 | 
 | 
 | 
 | |
| Dimensions, Rack Mount, W x D x H | 
 | 
 | 
 | 
 | |
| 
 | Unit, in. (mm) | 16.9 x 26.1 x 6.8 (430 x 662 x 173) | 16.9 x 26.5 x 10.3 (430 x 672 x 261) | ||
| 
 | 
 | 
 | 
 | ||
| 
 | Shipping, in. (mm) | 26.1 x 33.1 x 13.2 (662 x 842 x 336) | 24.1 x 32.8 x 16.7 (612 x 832 x 424) | ||
| 
 | 
 | 
 | 
 | 
 | |
| Weight lb (kg) | 
 | 
 | 
 | 
 | |
| 
 | Unit, lb (kg) | 56.2 (25.5) | 78.3 (35.5) | ||
| 
 | Shipping, lb (kg) | 70.5 (32) | 92.6 (42) | ||
| Input AC Parameters | 
 | 
 | 
 | 
 | |
| 
 | Nominal Operating Frequency | 
 | 50 or 60Hz (Factory Default is 60Hz) | ||
| 
 | 
 | 
 | 
 | 
 | |
| 
 | Factory Default VAC | 120/208VAC at 120 degrees | 120/208VAC at 120 degrees | ||
| 
 | 
 | 
 | |||
| 120 degrees | 120 degrees | ||||
| 
 | Allowable Input Phase Angle | 120, 180, 240 degrees,  | |||
| 
 | (Restrictions for  | ||||
| 
 | 
 | ||||
| 
 | Factory Default  | 
 | 120 VAC nominal | ||
| 
 | 
 | 
 | |||
| 
 | User Configurable  | 100/110/115/120VAC (can be modified with configuration program) | |||
| Input Frequency w/o Battery Operation | 
 | 40 - 70 Hz | |||
| 
 | Input Power Connection | Hardwire Terminal Block 3W + G  | |||
| 
 | 
 | 
 | |||
| 
 | 150VAC | ||||
| 
 | 
 | 
 | 
 | 
 | |
| Output AC Parameters | 
 | 
 | 
 | 
 | |
| 
 | Factory Default VAC | 
 | 120/208VAC @ 120 degrees | ||
| 
 | 120 degrees | ||||
| 
 | Allowable Output Phase Angle | 120, 180, 240 degrees,  | |||
| 
 | 
 | 
 | 
 | ||
| 
 | Factory Default  | 
 | 120VAC nominal | ||
| 
 | 
 | 
 | 
 | ||
| 
 | User Configurable  | 
 | 100/110/115/120VAC, ±2% | ||
| 
 | 
 | 
 | 
 | 
 | |
| 
 | 
 | 
 | 
 | ||
| 
 | 105% to 130% | 
 | 1 Minute | ||
| 
 | 131% to 150% | 
 | 10 seconds | ||
| 
 | 
 | 
 | 
 | ||
| 
 | 151% to 200% | 
 | 1 second | ||
| 
 | 
 | 
 | 
 | ||
| 
 | >200% (impact load) | 
 | At least 5 cycles | ||
| 
 | 
 | 
 | 
 | 
 | |
| Bypass Protection Limits | 
 | 
 | 
 | 
 | |
| 
 | Disable Bypass Operation | If input voltage exceeds ±15% of the nominal voltage | |||
| 
 | If input voltage returns to within ±10% of nominal output voltage | ||||
| 
 | 
 | 
 | |||
| 
 | Disable Bypass Operation | When the input frequency prevents synchronous operation | |||
| 
 | 
 | 
 | 
 | 
 | |
| Environmental | 
 | 
 | 
 | 
 | |
| 
 | Operating Temp, °F (°C) | 32 to 104 (0 to 40); see Table 9 - Operating temperature parameters | |||
| 
 | Storage Temp, °F (°C) | 
 | 5 to 122  | ||
| 
 | Relative Humidity | 
 | 0% to 95%,  | ||
| 
 | 
 | 
 | |||
| 
 | Operating Elevation | Up to 10,000 ft. (3000m) at 77°F (25°C) without derating | |||
| 
 | 
 | 
 | |||
| 
 | Audible Noise | less than 55dBA at 3.2ft. (1m) rear; less than 50dBA at 3.2ft. (1m) front and sides | |||
| 
 | 
 | 
 | 
 | 
 | |
| Agency | 
 | 
 | 
 | 
 | |
| 
 | Safety | 
 | UL 1778,  | ||
| 
 | RFI/EMI | FCC Part 15, Subpart B, Class A, FCC Class A | |||
| 
 | 
 | 
 | 
 | ||
| 
 | Surge Immunity | 
 | IEEE/ANSI C62.41 Category A & B | ||
| 
 | 
 | 
 | 
 | ||
| 
 | Transportation | 
 | ISTA Procedure 1A | ||
| 
 | 
 | 
 | 
 | 
 | 
 | 
38