Xerox PE120i manual Making General Maintenance Settings, Maintenance tab

Making General Maintenance Settings

Use these instructions to set a number of maintenance items and to change the admin user’s name and password.

To make general maintenance settings, perform these steps:

1	¾	Enable CentreWare Internet Services (see “Enabling Internet Services” on page 9-4).
2	¾ At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the
		[Maintenance] tab.

Enter your [Admin User Name] and [Password].

3	¾	In the Maintenance frame, select [Maintenance].
4	¾ In the Maintenance area:
		Enter the [Service Number] to telephone to obtain service or advice.

Choose the required USB Mode, UI Language, Power Save time and Clock Mode from the drop-down lists.

Click the [Print] button to print an [Internal Cleaning Sheet].

¾To change the Admin User Password, in the Change Admin User Name and Password

5 area:

Enter the [New User Name] and [Old User Name].

Enter the [New User Password] and [Old User Password].

6 ¾ Click the [Apply] button to implement any changes.

NOTE: Click the [Undo] button to cancel any changes made and return to the previous values.

Administration Tools

7	¾ Select the [Status] tab and then select [Reset Network Controller] to enable the
	selection to take effect.

Xerox WorkCentre PE120i System Administration Guide Page 9-9