AppleTalk
3
4
5
¾Press or until Configure Network is displayed and press [Enter].
¾Press or until Configure Network is displayed and press [Enter].
¾Press or until Ethertalk is displayed and press [Enter].
¾To enable or disable Ethertalk,
press or until the desired setting, [On] or [Off] is displayed and press [Enter].
8.Network Setup [Config Network]
Config Network
[Ethertalk]
Ethertalk
[On]
NOTE: The WorkCentre PE120i will attach itself to the default zone of the local segment where it is connected.
6 | ¾ Install the Printer Driver (see “Printer Driver Installation (Mac OS 8x,9x only)” on page |
Page | Xerox WorkCentre PE120i System Administration Guide |