Xerox PE120i manual Upgrading Firmware

Page 122

Administration Tools

Upgrading Firmware

Firmware upgrades may supplied on a CD or as a download from the internet. Use these instructions to install firmware upgrades in the WorkCentre PE120i.

To upgrade the firmware, perform these steps:

1	¾	Enable CentreWare Internet Services (see “Enabling Internet Services” on page 9-4).
2	¾ At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the
2		[Maintenance] tab.

Enter your [Admin User Name] and [Password].

3	¾ In the Maintenance frame, select [Firmware Upgrade].
4	¾ Insert the CD or download the upgrade from the internet.
5	¾ Choose the type of firmware upgrade Machine or Network.
6	¾ Enter the file name and location or [Browse] to the location and select the file.
7	¾ Click the [Upgrade] button.

Page 9-10

Xerox WorkCentre PE120i System Administration Guide

Image 122

Contents WorkCentre PE120i System Administration Guide By Xerox Corporation. All rights reserved Table of Contents Test Print Information Checklist AppleTalk InstallationInformation Checklist Testing Information Checklist Installation ProcedureInformation Checklist Fax Setup using Internet Services Network ToolsMaintenance using Internet Services Welcome Introduction Xerox WorkCentre PE120iOr strong chemical solvents or Aerosol cleaners or pour fluidsAbout This Guide Directly onto any areaRelated Information Sources Customer Support Safety Welcome Safety Standards Regulatory Information Laser Safety FCC Part Reference CFR SectionQuestion Is Xerox equipment safe? What is the Electricity at Work Regulation?Electricity at Work Regulations UK only Require records of all tests Question Is the Xerox equipment in my premises safe?My premises AL7 1HE Regulations Europe France IrelandPortugal Finland Italy SpainData Coupler Information Regulations USAFax Send Header Requirements Welcome Regulations Canada Environmental Compliance Energy StarBasic Network Installation IntroductionInformation Checklist Basic TCP/IP Settings Installation ProcedureEnabling or Disabling TCP/IP BasicNetwork Communication Setup Automatically setting TCP/IP AddressesPrinting a System Data Manually setting TCP/IP Addresses Manual IP Address Xxx.xxx.xxx.xxx Workstation Setup Test Print NetWare NetWare NetWare Environments NetWare 4.x, 5.xInstallation Options IPX Queue Based PrintingNetwork Communication Setup Using NetWare UtilitiesInstallation Procedure Auto Enable Enable Snap Off NetWare Setup Test Print Print Driver Installation for Networked Printers ¾ Information Checklist -2 ¾ Workstation SetupPrint Driver Installation for Networked Printers Workstation Setup Windows XP TCP/IP ¾ Select Start, select Printers and Faxes¾ Continue with Test Print on Windows 2000 TCP/IP Print Driver Installation for Networked Printers Have Disk Windows NT V4.0 TCP/IPPanel Print Driver Installation for Networked Printers Windows 98/Me Windows XP Internet Printing Protocol Windows 2000 Internet Printing Protocol Apple Mac OSX with Rendezvous ¾ Choose the WorkCentre PE120iTest Print AppleTalk AppleTalk AppleTalk Installation Network Setup Config Network Ethertalk Printer Driver Installation Mac OS 8x,9x only Setting the Printer Driver Mac OS 8x,9x only Xerox WCPE120i ppd should be displayed. Click the OK buttonPrinter Driver Installation Mac OSX only Setting the Printer Driver Mac OSX only ¾ Select AppletalkTest Print AppleTalk Network Installation Using Internet Services Network Installation Using Internet Services Using CentreWare Internet Services Network Communication Setup Enabling Internet Services Configuring the Network Ethernet Configure the WorkCentre PE120i AppleTalkSelections to take effect Test Print Pconsole or Nwadmin Setup NetWare¾ Continue with Configure the WorkCentre PE120i Set the Queue Poll Interval¾ Enable the Service Advertising Protocol SAP TCP/IP ¾ Continue with Test Print Test Print Configure Snmp Properties linkFrame Configure Ssdp SsdpLPR/LPD Enter the Port NumberServices ¾ Select Raw TCP/IP Printing Raw TCP/IP PrintingProperties tab ¾ Open a document on a client workstation IPP Access the WorkCentre PE120i embedded Http Server Home Http Test Print Network Installation Using Internet Services Local Connection Local Connection Installation Procedure Driver Installation 12 ¾ Continue with Workstation Setup ¾ Continue with Workstation Setup 10 ¾ 11 ¾ 12 ¾ ¾ Continue with Workstation Setup Workstation Setup Properties window will be displayed Local Connection Test Print or Scan Test ScanFax Fax Fax Setup using Internet Services Enabling Internet ServicesFax General Setup Fax Phone Book Setup Testing Administration Tools Reset Network Network ToolsSet To Defaults Maintenance using Internet Services Checking Printer Status Status tabPrinting Reports Print tabDefining the Printer Checking Configurations Enter your Admin User Name and Password Making General Maintenance SettingsMaintenance tab Upgrading Firmware Obtaining Assistance Assistance tabAdministration Tools Glossary CSVHttp Ieee PCL SPX Index 5-8Index Index-iii

Related manuals

Manual 20 pages 909 b

Manual 7 pages 49.77 Kb