
NetWare
3 ¾ Press or
until Configure Network is displayed and press [Enter].
4 ¾ Press or
until Netware is displayed and press [Enter].
5 ¾ Press or
until the appropriate frametype is displayed and press [Enter].
The choices are:
Auto
Enable 802.3
Enable II
Enable 802.2
Enable SNAP
Off
6 ¾ Continue with NetWare Setup on page
8.Network Setup [Config Network]
Config Network
[Netware]
Netware
[Auto]
Page | Xerox WorkCentre PE120i System Administration Guide |