Xerox manual ¾ Continue with Configure the WorkCentre PE120i, Set the Queue Poll Interval

Network Installation Using Internet Services

¾Obtain and record the following information from the setup just completed. This

6 information is needed to configure the device with CentreWare Internet Services:

File Server Name

Print Server Name

Print Server Password

Frame Type

7 ¾ Continue with Configure the WorkCentre PE120i.

Configure the WorkCentre PE120i

To complete the installation of the WorkCentre PE120i, perform these steps:

1 ¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 6-5).

¾At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the

2 [Properties] tab.

¾Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame,

3	and then select the [+] symbol to the left of the Protocols folder.
4	¾ In the Properties frame, within the Physical Connections folder, select [NetWare].
5	¾ Make the following selections and settings in the General section of the Protocols frame:
	Select the checkbox to enable NetWare.

Choose the [Frame Type].

Set the [Queue Poll Interval].

This value determines how often the WorkCentre PE120i polls the NetWare file server to check if there is a file at the server to be printed or faxed. Enter a value from 10 to 240 seconds.

Enter the [Print Server] name. Use a meaningful name, such as the location of the device.

NOTE: The Printer Server Name must match that entered using PConsole or the NW Admin utility.

Page 6-12 Xerox WorkCentre PE120i System Administration Guide