Xerox PE120i manual Test Print

Network Installation Using Internet Services

	Test Print
	To ensure the device has been installed on the network correctly a test print should be
	submitted from a client workstation. Perform the following steps:
1	¾ Open a document on a client workstation.
2	¾ Select the device as the printer to which the selected document will be sent.
3	¾ Print the document on the device and verify that it prints correctly.
4	¾ Ensure the driver is installed on every workstation that will be sending jobs to the device.
5	¾ Repeat the test for all workstations that will be sending jobs to the device.
6	¾ The installation process is now complete.

Page 6-16 Xerox WorkCentre PE120i System Administration Guide