Xerox PE120i manual Ipp

Network Installation Using Internet Services

IPP

Use these instructions to setup IPP using CentreWare Internet Services.

NOTE: The HTTP settings for the device will have been setup when completing the Enabling CentreWare Internet Services section.

To complete the installation of the device, perform these steps:

1	¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 6-5).
2	¾ At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the
	[Properties] tab.
3	¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame,
	and then select the [+] symbol to the left of the Protocols folder.
4	¾ Select [IPP].
	Select the checkbox to enable IPP.

Check the IPP Configuration details are correct. If any of the details are incorrect then

enter the required configuration details in the appropriate boxes.

5 ¾ Click the [Apply] button to implement any changes.

NOTE: Click the [Undo] button to cancel any changes made and return to the previous values.

¾Select the [Status] tab and then select [Reset Network Controller] to enable the

6	selections to take effect.
7	¾ Continue with Test Print.

Page 6-24 Xerox WorkCentre PE120i System Administration Guide