6 | ¾ Enter the [NDS Tree] and [NDS Context] if using NDS. |
7 | ¾ Enable the [Service Advertising Protocol (SAP)]. |
8 | ¾ Enter the [Primary File Server] name, if using Bindery. |
9 | ¾ Click the [Apply] button to implement any changes. |
| NOTE: Click the [Undo] button to cancel any changes made and return to the |
| previous values. |
10 |
|
¾ Select the [Status] tab and then select [Reset Network Controller] to enable the | |
selections to take effect. | |
11 | ¾ Continue with Test Print. |
| Test Print |
| To ensure the device has been installed on the network correctly a test print should be |
| submitted from a client workstation. Perform the following steps: |
1 | ¾ Open a document on a client workstation. |
2 | ¾ Select the device as the printer to which the selected document will be sent. |
3 | ¾ Print the document on the device and verify that it prints correctly. |
4 | ¾ Ensure the driver is installed on every workstation that will be sending jobs to the device. |
5 | ¾ Repeat the test for all workstations that will be sending jobs to the device. |
6 | ¾ The installation process is now complete. |
Network Installation Using Internet Services
Xerox WorkCentre PE120i System Administration Guide | Page |