Xerox PE120i manual Test Print or Scan, Test Scan

Local Connection

Test Print or Scan

	To ensure the WorkCentre PE120i has been installed correctly a test print or scan should be
	submitted from the workstation.
	Test Print
	Perform the following steps:
1	¾ Open a document on the workstation.
2	¾ Select the WorkCentre PE120i as the printer to which the document will be sent.
3	¾ Print the selected document on the device and verify that it prints correctly.
4	¾ The installation process is now complete.
	Test Scan
1	¾ Open the Twain compliant application used to scan documents.
2	¾ Place a document in the WorkCentre PE120i.

¾Follow the instructions for scanning from the Help supplied by the application to scan

3	verify that it scans correctly.
4	¾ The installation process is now complete.

Page 7-12 Xerox WorkCentre PE120i System Administration Guide