Xerox PE120i manual Ethernet

Ethernet

Use these instructions to set the rated speed for Ethernet using CentreWare Internet Services: To complete the installation of the WorkCentre PE120i, perform these steps:

1 ¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page 6-5).

¾At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the

2 [Properties] tab.

3	¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame,
	and then select the [+] symbol to the left of the Physical Connections folder.
4	¾ In the Properties frame, within the Physical Connections folder, select [Ethernet].
5	¾ Choose the appropriate [Rated Speed].
6	¾ Click the [Apply] button to implement any changes.
	NOTE: Click the [Undo] button to cancel any changes made and return to the
	previous values.

Network Installation Using Internet Services

7	¾ Select the [Status] tab and then select [Reset Network Controller] to enable the
	selection to take effect.

Xerox WorkCentre PE120i System Administration Guide Page 6-7