Xerox PE120i manual Test Print

Basic Network Installation

Test Print

	To ensure the WorkCentre PE120i has been installed on the network correctly a test print
	should be submitted from a client workstation. Perform the following steps:
1	¾ Open a document on a client workstation.
2	¾ Select the WorkCentre PE120i as the printer for sending documents to.
3	¾ Print the document on the device and verify that it prints correctly.

¾Ensure the print driver is installed on every workstation that will be sending jobs to the

4 device.

5 ¾ Repeat the test for all workstations that will be sending jobs to the device.

Page 2-10 Xerox WorkCentre PE120i System Administration Guide