¾Select the [Status] tab and then select [Reset Network Controller] to enable the
6 | selections to take effect. |
7 | ¾ Continue with Test Print. |
| Test Print |
| To ensure the device has been installed on the network correctly a test print should be |
| submitted from a client workstation. Perform the following steps: |
1 | ¾ Open a document on a client workstation. |
2 | ¾ Select the device as the printer to which the selected document will be sent. |
3 | ¾ Print the document on the device and verify that it prints correctly. |
¾Make sure that the driver is installed on every workstation that will be sending jobs to the
4 device.
5 | ¾ | Repeat the test for all workstations that will be sending jobs to the device. |
6 | ¾ | The installation process is now complete. |
Network Installation Using Internet Services
Xerox WorkCentre PE120i System Administration Guide | Page |