Xerox PE120i manual Driver Installation

Local Connection

Driver Installation

Installing Xerox Drivers in Microsoft Windows XP or Windows 2000 using the USB port

1	¾ Plug the USB cable into the PE120 and connect to your Personal Computer (PC). Start
	your PC and turn on the PE120.
2	¾ Insert the Xerox Drivers CD into the CD-ROM drive.

3	¾ The "Found New Hardware Wizard" will display. Confirm that the radio button "Install the
	software automatically" is chosen. Click [Next].
4	¾ The Wizard will begin to install the scan driver for the PE120.

5	¾ When the "Completing the Found New Hardware Wizard" screen displays click [Finish].
	The scan driver for the PE120 is now loaded.

6	¾ The "Found New Hardware Wizard" will display. Confirm that the radio button "Install the
	software automatically" is chosen. Click [Next].
7	¾ The Wizard will begin to install the PCL Print driver for the PE120.

8	¾ The Hardware Wizard will search the CD-ROM drive for the print driver and will display the
	following screen.

9	¾ When the "Completing the Found New Hardware Wizard" screen displays click [Finish].
	The PCL print driver for the PE120 is now loaded.

¾From within Microsoft Windows click [Start] and then [Settings] and then [Printers and

10	Faxes]. Click on the "Xerox WC PE120 series PCL6" printer object and then select [File]
	and then [Properties]. When the screen appears click [Print Test Page]. The PE120 will
	now print a test page. If the PE120 does not print then click [Troubleshoot...] and follow
	the instructions on screen.

¾If you want the PE120 to be your default printer. From within Microsoft Windows click

11	[Start]and then [Settings] and then [Printers and Faxes]. Click on the "Xerox WC PE120
	series PCL6" printer object and then select [File] and [Set as Default Printer].

Page 7-4 Xerox WorkCentre PE120i System Administration Guide