Cisco Systems MeetingPlace Video Integration manual Creating a Service for Cisco MeetingPlace

Chapter 3 Installing Cisco MeetingPlace Video Integration

Before You Install

Step 1 Click MCU, then click Settings.

Step 2 Click the Advanced button.

Step 3 Click the Commands button.

The Advanced Command dialog box appears.

Step 4 In the Advanced Command dialog box, do the following:

a.In the Available commands window, click Audio indication interval. Your selection appears in the Command field.

b.In the Parameter field, enter the value in milliseconds that you want Cisco MeetingPlace to announce to video participants that they are in the waiting room and that the conference has not formally started.

Tip We recommend entering 1500 to establish an interval of 15 seconds.

c.Click Send, then click Close.

Creating a Service for Cisco MeetingPlace

You must create a Cisco IPVC MCU service for Cisco MeetingPlace. Before you create a service in the Cisco IPVC MCU make sure that the media processor (MP) that the Cisco IPVC MCU uses supports Cisco MeetingPlace.

Table 3-1provides information about which Cisco IPVC media processors support Cisco MeetingPlace.

Table 3-1 Media Processors That Support Video in Cisco MeetingPlace, Release 5.3

	Software Supporting
Cisco IPVC Media Processor	Cisco MeetingPlace
Local Cisco IPVC MCU media	Release 3.5.24 or later releases
processor
Cisco IPVC EMP	Release 2.0.11 or later releases
Cisco IPVC Rate Matching module	Does not support Cisco MeetingPlace
Data Conferencing Card	Does not support Cisco MeetingPlace.

You can use one of the preconfigured Cisco MeetingPlace service templates or manually create a Cisco MeetingPlace service.

Using Preconfigured Service Templates

Cisco IPVC MCU, Release 3.5.24 includes three preconfigured services that are designed for Cisco MeetingPlace.

Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3

OL-6280-01 3-5