Per meeting field | Cisco Systems MeetingPlace Video Integration

Chapter 4 Configuring and Managing Cisco MeetingPlace Video Integration

About Managing Video-Conferencing Resources

Table 4-2 Conference and Port Parameters (continued)

Parameter	Values	Where Specified

Maximum number of	2 to the maximum number of	In MeetingTime, click the Configure
video ports that users can	ports that can be scheduled in	tab, then Scheduling Parameters, then
schedule for a	advance. The number of ports	scroll down in the panel on the right to
conference.	that can be scheduled in	the Video meetings heading, Max ports
	advance is the total number of	per meeting field.
	ports minus the number of ports
	designated as floater ports, plus
	the number of overbook ports.
	Entering a large number into
	this field may limit the
	availability of ports and
	simultaneous conferences.
	Entering 0 means that video
	conferences cannot be
	scheduled.

Default number of video	0 (zero), or any number	In MeetingTime, click the Configure
ports to schedule for each	between 2 and the maximum	tab, then click Scheduling Parameters,
conference.	number of video ports in the	then scroll down in the panel on the right
This number appears by	system that can be scheduled.	to the Video meetings heading, Default
This number appears by	The number of ports that can be	# of ports to schedule field.
default in the # of video	The number of ports that can be	# of ports to schedule field.
default in the # of video	scheduled in advance is the
callers field on the	scheduled in advance is the
callers field on the	total number of ports minus the
scheduling form of users	total number of ports minus the
whose profiles allow	number of ports designated as
whose profiles allow	floater ports, plus the number of
them to schedule video	floater ports, plus the number of
them to schedule video	overbook ports.
conferences. If users do	overbook ports.
conferences. If users do
not change this value	By default, this parameter is set
when they schedule a	to zero.
conference, this number	Do not enter 1; Cisco
of video ports will be	Do not enter 1; Cisco
of video ports will be	MeetingPlace will not schedule
scheduled for that	MeetingPlace will not schedule
scheduled for that	a conference that specifies a
conference.	a conference that specifies a
conference.	single video port.
	single video port.
	Entering a large number into
	this field may limit the
	availability of ports and
	simultaneous conferences.

Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3

4-6	OL-6280-01

Parameter

tab, then Scheduling Parameters, then

the Video meetings heading, Max ports

per meeting field.

tab, then click Scheduling Parameters,

to the Video meetings heading, Default

# of ports to schedule field.

OL-6280-01