Cisco Systems MeetingPlace Video Integration manual Values Where to Configure

Chapter 4 Configuring and Managing Cisco MeetingPlace Video Integration

About Managing User Profiles for Video Use

Table 4-5 Configure For Each User

Item	Values		Where to Configure
Allow video scheduling?	No		In the profile of the user,
Users who are allowed to schedule	Yes		in the Restrictions
			section
meetings will see the video scheduling	Group Dflt (Group Default)
option when they schedule a meeting.
Otherwise, the video scheduling option will
not appear on the scheduling form.
Endpoint Bandwidth	•	128 kbps	In the profile of the user,
The default video endpoint bandwidth of	•	256 kbps	in the Video Meetings
			section.
this user.	•	384 kbps
	•	Group Dflt (Group
For more information about bandwidth use,		Default: the bandwidth
see About Video-Conferencing Bandwidth,		set for the group to
page 4-12.		which this user is
		assigned)
	The default bandwidth is
	384kbps.
Endpoint Address	For H.323 or SCCP		In the profile of the user,
Default video endpoint address that Cisco	endpoints:		in the Video Meetings
			section.
MeetingPlace outdials to bring the user into	Enter the E.164 phone
the video conference.	number of the endpoint of
Entering a value for this parameter	the user.
simplifies for users the process of attending	For ISDN endpoints:
video conferences.	Precede the E.164 phone
	number of the video
	endpoint with the service
	code of the Cisco IPVC PRI
	Gateway. For example, if the
	phone number of the ISDN
	video endpoint is
	1-800-555-0101, and the
	service prefix for the type of
	call that is appropriate for
	that endpoint is 89, enter
	8918005550101. For
	information, see the
	documentation for your
	Cisco IPVC PRI Gateway.

Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3

OL-6280-01 4-11