Chapter 3 Installing Cisco MeetingPlace Video Integration
Before You Install
Making Sure that a Conference Password Is Not Required
Step 1 Click the Management button.
The Management Settings dialog box appears.
Step 2 Make sure that
Step 3 Click OK.
The Add Services dialog box appears.
Setting Conference View Parameters
When you set view parameters, use the Cisco MeetingPlace service template as a model. The templates are described in Using Preconfigured Service Templates, page
Note | • One Voice Activated, |
| your hardware supports it. |
| • Do not create multiple identical views for a single service code. Each view must be unique. |
|
|
| General Instructions for Setting View Parameters |
|
|
Step 1 | Click the edit view icon. |
| The Edit View dialog box appears. |
Step 2 | In the “Use Processor” field, click the type of media processor that you want this service to use. |
Note The MP and RM option does not support Cisco MeetingPlace.
•Click MP to specify that the service only uses the local media processor to process video conference calls.
•Click EMP to specify that the service uses the Cisco IPVC Enhanced Media Processor (EMP) register with the Cisco IPVC MCU to process video conference calls.
•Click Auto to allow the Cisco IPVC MCU to choose the media processor the Cisco IPVC MCU will use to process a specific video conference.
Note See Cisco IP/VC 3511 MCU and Cisco IP/VC 3540 MCU Module Administrator Guide, Version 3.2 for information about registering a media processor with the Cisco IPVC MCU.
Step 3 In the “Video Picture Size” field, click the video format that you anticipate most endpoints will use.
Step 4 To enable the Cisco IPVC MCU to switch the video to the speaker who is speaking the loudest, check Enable voice activate.
Administrator’s Guide for Cisco MeetingPlace Video Integration Release 5.3
|
| |
|