Tape Monitor Function
If you want to select the source connected to TAPE 2 jacks, press the TAPE 2 MONITOR button to turn the tape monitor function on. The TAPE 2 MONITOR indicator lights.
Press the TAPE MONITOR button again to cancel the tape monitor function.
<When the tape monitor function is on, sources other than TAPE 2 cannot be heard. Be sure to turn the function off while listening to other sources.
5Play the source, and gradually turn up the volume to the required level by turning the VOLUME knob.
Recording
1.Select a source to be recorded by turning the INPUT SELECTOR.
2.Start recording.
<The volume and tone control have no effect on the recording signals.
<If a
Selecting the speakers
Press the SPEAKERS button (A or B) to turn the speakers on or off.
Listening through headphones
For private listening, first reduce the volume level on the receiver to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the VOLUME knob.
If you want to cut off the sound from speakers, press the SPEAKERS button to turn it off.
CAUTION
Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do not place your headphones on your head until after you have plugged them in.
ENGLISH
9