PD-01 PROFIBUS-DP Module
ExtUserPrmData = 13 "LossSPComTreat"
Unsigned16 0
Prm_Text_Ref = 3
EndExtUserPrmData
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(2) = 2
Ext_User_Prm_Data_Ref(4) = 3
Ext_User_Prm_Data_Ref(6) = 4
Ext_User_Prm_Data_Ref(8) = 5
Ext_User_Prm_Data_Ref(10) = 6
Ext_User_Prm_Data_Ref(12) = 7
Ext_User_Prm_Data_Ref(14) = 8
Ext_User_Prm_Data_Ref(16) = 9
Ext_User_Prm_Data_Ref(18) = 10
Ext_User_Prm_Data_Ref(20) = 11
Ext_User_Prm_Data_Ref(22) = 12
Ext_User_Prm_Data_Ref(24) = 13
File END: ==========================================================
NOTE:
The required GSD file is available and can be downloaded from the DELTA web site http://www.delta.com.tw, or you can copy this text to a text editor such as NOTEPAD, and save it as a GSD file named “DELT08DB.GSD”. Please make sure to specify the file name extension as “.GSD”, PLEASE DO NOT SAVE IT extension “.GSD.TXT”.
User parameters in GSD file
The user parameters in GSD file are used for the configuration of the PROFIBUS network. The description of the user parameters are shown in the following table:
| Item | Name | Type |
| Description | Default |
|
| 1 | Data Input 1 | UINT | This is a MODBUS address. The 1st word in | 0x2000 |
| |
|
|
|
| PZD of cyclic output data will be sent to this |
|
| |
|
|
|
| address. |
|
|
|
| 2 | Data Input 2 | UINT | This is a MODBUS address. The 2nd word in | 0x2001 |
| |
|
|
|
| PZD of cyclic output data will be sent to this |
|
| |
|
|
|
| address. |
|
|
|
|
|
|
|
|
|
|
|
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED | 25 |
|
| ||||