Oregon Scientific RMR329P Sensor Data Transmission, Clock Clock Reception, Manually SET Clock

EN

NOTE We recommend that you use alkaline batteries with this product for longer usage and consumer grade lithium batteries in temperatures below freezing.

SENSOR DATA TRANSMISSION

Outdoor sensor:

The main unit will automatically search for the outdoor sensor. The sensor reception icon in the remote sensor area shows the status:

ICON DESCRIPTION

Main unit is searching for sensor(s)

A channel has been found

The sensor cannot be found.

NOTE If the sensor is not found, check the batteries, obstructions, and remote unit location.

For best results:

•Place the sensor out of direct sunlight and moisture.

•Position the sensor facing main unit, minimizing obstructions.

•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.

•Position the sensor close to the main unit during cold winter months.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock automatically with a clock signal.

S lide EU / UK to select the signal received.

•EU: DCF-77 signal: within 1500 km (932 miles) of Frankfurt, Germany.

•UK: MSF-60 signal: within 1500 km (932 miles) of Anthorn, England.

To enable / disable signal reception:

Press and hold to enable, or to disable signal reception.

NOTE Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal.

Clock signal reception indicator:

STRONG	WEAK	NO
SIGNAL	SIGNAL	SIGNAL

MANUALLY SET CLOCK

1.Press and hold CLOCK for 2 seconds.

2.Press or to change the settings.

3.Press CLOCK to confi rm.

4