www.ti.com
Ethernet Media Access Controller (EMAC) Registers
5.45 Transmit Channel
The transmit channel
| Figure 71. Transmit Channel n DMA Head Descriptor Pointer Register (TXnHDP) |
31 | 16 |
| TXnHDP |
| |
15 | 0 |
| TXnHDP |
LEGEND: R/W = Read/Write;
Table 70. Transmit Channel n DMA Head Descriptor Pointer Register (TXnHDP)
Field Descriptions
Bit | Field | Value | Description |
TXnHDP |
| Transmit channel n DMA Head Descriptor pointer. Writing a transmit DMA buffer descriptor | |
|
|
| address to a head pointer location initiates transmit DMA operations in the queue for the |
|
|
| selected channel. Writing to these locations when they are nonzero is an error (except at reset). |
|
|
| Host software must initialize these locations to 0 on reset. |
5.46 Receive Channel
The receive channel
| Figure 72. Receive Channel n DMA Head Descriptor Pointer Register (RXnHDP) |
31 | 16 |
| RXnHDP |
| |
15 | 0 |
| RXnHDP |
LEGEND: R/W = Read/Write;
Table 71. Receive Channel n DMA Head Descriptor Pointer Register (RXnHDP)
Field Descriptions
Bit | Field | Value | Description |
RXnHDP |
| Receive channel n DMA Head Descriptor pointer. Writing a receive DMA buffer descriptor | |
|
|
| address to this location allows receive DMA operations in the selected channel when a channel |
|
|
| frame is received. Writing to these locations when they are nonzero is an error (except at reset). |
|
|
| Host software must initialize these locations to 0 on reset. |
106 Ethernet Media Access Controller (EMAC)/SPRU941A
Management Data Input/Output (MDIO) | Submit Documentation Feedback |
|