Safety Precautions
This section describes the warnings and cautions intended to ensure safe and effective use of the
WARNING:
If the
Never attempt to repair this product yourself. Improper repair work can be dangerous.
Never disassemble or modify this product. Tampering with this product may result in injury or fire.
Be sure to use the specified power source. Connection to an improper power source may cause fire.
Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire.
If water or other liquid spills into this equipment, shut down the
If you open the DIP switch cover, be sure to close the cover and tighten the screw after adjusting the DIP switch. Using this product with the cover open may cause fire or electric shock.
CAUTION:
Do not connect cables in ways other than those mentioned in this manual. Different connections may cause equipment damage or fire.
Be sure to set this equipment on a firm, stable, horizontal surface. The product may break or cause injury if it falls.
Do not use this product in locations subject to high humidity or dust levels. Excessive humidity and dust may cause equipment damage or fire.
Do not place heavy objects on top of this product. Never stand or lean on this product. Equipment may fall or collapse, causing breakage and possible injury.
To ensure safety, unplug this product before leaving it unused for an extended period.
Before moving this product, be sure to unplug it and all the cables connected to it.
Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire.
Caution Labels
CAUTION:
The thermal head can be very hot during printing and immediately after printing. Toutching it may cause burns. Be sure to do cleaning and other work after the thermal head cools down. See illustration A for the location of the thermal head.