GB
PLAYING IN RANDOM ORDER (SHUFFLE)
All CDs:
• Press SHUFFLE 8 before or during play.
–If the CD compartment was open, it will now close.
–SHUFFLE lights up and all the tracks are now played in a random order.
– If you press |
| (5), you will select any one of |
| ||
the following tracks. |
|
|
•Press SHUFFLE again if you wish to return to nor- mal play.
NOTE! If, during play, you open the CD compart- ment to change CDs (see ‘NORMAL PLAYBACK’) then playback in random order will be cancelled. Playback will stop as soon as the last track of the cur- rent CD has been played (in normal order).
One CD:
•The
•Select the number of the required CD using DISC (13) or NEXT DISC(8) (on the remote control).
•Press SHUFFLE (8), within the time the CD num- ber is flashing on the display.
–DISC and SHUFFLE light up; the tracks of the selected CD will now be played in random order
- If you press |
|
| (5), you will select any one of |
| |||
the following tracks. |
| ||
If you press REPEAT (10) twice, the tracks will be repeated in a different order each time, although the first track will always be the same.
–When all tracks of the selected CD have been played, playback stops.
•Press SHUFFLE again if you wish to return to nor- mal play.
CALLING UP INFORMATION ON THE
DISPLAY (TIME)
In STOP mode:
Time display
–After loading the CDs and closing the CD com- partment, the display shows the number of the CD to be played (= default display in STOP mode).
During play:
Time display
–When you start play (from STOP mode), the dis- play shows the elapsed playing time of the current track ( default display in PLAY mode).
•Press TIME (12) whenever you want to know the remaining playing time of the current track (REM
TRACK TIME).
•Press TIME again if you wish to know the remain- ing playing time of the entire CD (TOTAL REM TIME).
Note - TOTAL REM(aining) TIME indication is not available in SHUFFLE mode.
•If you press TIME again, you will switch to text display; the display shows the number of the current CD.
NAD
8
•If you wish to know the total playing time of the entire CD you must go back to STOP mode first and then press TIME.
–The display now shows the number of tracks and the total playing time of the current CD (TOTAL TIME).
REPEATING PLAY (REPEAT)
Repeating a track:
•Press REPEAT (10) before or during playback of the CD.
–REPEAT (1) lights up; the track will now be repeated continuously.
•Press REPEAT three times to stop the track being repeated.
Repeating a CD:
•Press REPEAT (10) twice before or during play- back of the CD.
–REPEAT DISC lights up; the CD will now be repeated continuously.
•Press REPEAT twice to stop the CD being repeat-
ed.
Repeating all CDs:
•Press REPEAT (10) three times before or during playback.
–REPEAT lights up; all CDs will now be repeated continuously.
•Press REPEAT again to stop the CDs being repeated.
NOTES!
–Repeating a track is not possible in SHUFFLE mode or when a programme is being stored.
–When a programme has been stored (for one or more CDs), then only the programme will be repeat- ed.
PROGRAMMING
STORING A PROGRAMME (PROGRAM)
–By programming the changer you can play up to 30 tracks in any required sequence.
–FULL lights up if you exceed the maximum of 30 tracks.
–WRONG DISC lights up if you select a
•In STOP mode, press PROGRAM 6 (on the remote control) to open the memory.
– SELECT DISC lights up and starts flashing.
•Select the number of the first required CD using DISC (13) or NEXT DISC (8) (on the remote control).
• Press | (4) or | (5) for less than 0.5 |
seconds) until the first track number you wish to pro- gramme appears under TRACK.
•Press PROGRAM (6) (on the remote control) again.
–The track number has now been stored in the changers memory.