Seagate manual QuickFind diagnostic display, HP ProLiant DL585 Server User Guide on

QuickFind diagnostic display

Figure 55 QuickFind diagnostic display LEDs

Table 13	Quickfind diagnostic display LEDs
Item	Description	Status	Action
1	Fan	Off = Normal	Be sure the fan is installed and seated properly.
		On = Attention required	If the fan is installed and seated properly, replace the fan.
2	Processor	Off = Normal	Processor pre-failure notification. Inspect the IML logs, POST
		On = Attention required	messages, or both. The processor might need to be
			replaced.
3	Processor	Off = Normal	Processor memory board power failure. If the problem
	memory board	On = Attention required	persists, replace the processor memory board.
4	PPM	Off = Normal	PPM power failure. If the problem persists, replace the PPM.
		On = Attention required	If the PPM and the BRD LEDs are both on, there is a
			configuration error.
5	Temperature	Off = Normal	One or more components have experienced an elevated
		On = Attention required	temperature or a thermal shutdown.
			A thermal shutdown is indicated by the Therm Trip LED.
			Be sure that the processor heatsink is properly attached.
			Be sure that no 1.7-inch DIMMs are installed that prevent
			airflow across the processor heatsink.
			Be sure that he correct DIMMs (1.2 inches tall) are installed.
			Be sure that all fans are installed and working properly.
			Be sure that the server environment meets posted
			requirements.
			For information about server environment requirements see
			the HP ProLiant DL585 Server User Guide on the
			documentation CD or at http://www.hp.com/support.
6	DIMM	Off = Normal	DIMM failure or configuration error. See the IML or POST
		On = Attention required	messages.

Server component identification 60