Audiovox ACD-25 manual OPERATINGINSTRUCTIONS/ Settingtheclock, Setting the Clock

OPERATINGINSTRUCTIONS/ SETTINGTHECLOCK

NOTES ON USE OF FRONT PANEL

1.Make sure the front panel is right-side-up when attaching it to the chassis as it cannot be attached when up-side down.

2.Do not press very hard on the front panel when attaching it to the chassis. No more than light to moderate pressure should be needed.

3.When attaching the front panel, make sure the right side is correctly engaged before pressing the left side to lock it into position.

4.When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage. Make sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other malfunctions.

DETACHING THE FRONT PANEL

Release Button

ATTACHING THE FRONT PANEL

Engage right side first

9

SETTING THE CLOCK

1.Turn the vehicle ignition and radio “on”.

2.Press and hold the Time/Frequency Selector button cp approximately 2 seconds until the time display begins flashing on the display panel.

3.Within 5 seconds after the time display begins flashing, press the Manual Down Tuning button ( ) to adjust the hours and the Manual Up Tuning button ( ) to adjust the minutes to the correct time.

4.Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and normal operation can resume.