Audiovox ACD-25 manual PRE-SET Scan Tuning PS, CD Mode Selector

OPERATINGINSTRUCTIONS

7

Tuning function. The radio will seek the next avail- able station and stop at that frequency. The Seek function can be stopped by pressing the button again or activating any other tuning function.

Pressing and holding either button for longer than

0.5seconds will cause the radio to continue tuning rapidly in the selected direction until the button is released at which point it will seek to the next avail- able station.

boAUTO-STORE TUNING (AS)

PRE-SET SCAN TUNING (PS)

During radio operation, press this button momentarily to scan the 6 stations pre-set into the memories of that band. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station. Press the button again momentarily to stop Pre-Set Scan operation and remain on the selected frequency.

Pressing the button for longer than 2 seconds will activate the Auto-Store Tuning feature which will au- tomatically scan the band and enter up to 6 strong stations into the 6 pre-set memories (the indication “AST” will appear on the display panel to show that Auto-Store Tuning is in progress). After entering the stations into the memories, the unit will automati- cally stop at each station for 5 seconds so each can be heard. If you have already set the pre-set memo- ries to your favorite stations, activating the Auto-Store feature will erase those stations and enter the new strong stations. This feature is most useful when travelling in a new area where you are not familiar with the local stations.

bpSTATION PRE-SET MEMORIES

To set any of the 6 pre-set memories in each band, use the following procedure:

1.Turn the radio on and select the desired band.

2.Select the first station to be pre-set using the

Manual Up/Down or Automatic Seek Tuning Con- trols bn.

3.Press the pre-set button to be set and continue to hold it in. After approximately 2 seconds, the vol- ume will be momentarily muted, indicating that the station is now set into that pre-set memory position. The station can now be recalled at any time by pressing that button.

4.Repeat the above procedure for the remaining 5 pre-sets on that band and for the other 4 bands on the unit.

bq LIQUID CRYSTAL DISPLAY PANEL

The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions.

NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for an extended period of time, they may take longer to illumi- nate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out will return to normal when the temperature increases to a normal range.

brDISC SLOT

With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism

engages and disc play begins. The indication, track number and elapsed time will appear on the display panel.

NOTE: This unit is designed for play of stan- dard 5" (12cm) Compact Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this unit, either with or without an adaptor, as damage to the player and/or disc can occur. Such damage will not be covered by the Warranty on this prod- uct.

bsTRACKSELECT

These buttons are used to quickly select the begin- ning of a particular track. With each momentary tap of the Forward Track Select button (TRK +), the next higher track number will be selected as shown on the display panel. Similarly, with each momentary tap of the Backward Track Select button (TRK -), the next lower track number will be selected.

bt CUE/REVIEW FUNCTIONS

High-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue button ( + ) to advance rapidly in the forward direction or the Review button ( - ) to advance rapidly in the backward direction. During either function, the elapsed time within each track will automatically be shown on the display panel.

bu CD PLAY/PAUSE SELECTOR ( / )

CD MODE SELECTOR

During disc play, press this button to temporarily stop
play of the disc (the	indication will flash and

“PAUS” will appear on the display panel). Press the button again to resume play of the disc from the point at which it was stopped. Pause mode will also be cancelled by activating any other disc function.

When listening to radio with a disc loaded in the unit