Audiovox ACD-25 manual CmSHUFFLE Playselectorshf, CnTRACK Scan SCN

( on the display panel), press this button to return to disc play mode from the beginning of the last track in play.

cl REPEAT PLAY SELECTOR (RPT)

During disc play, press this button to repeat the play of the selected track (“RPT” will appear on the dis- play panel). Play of the track will continue to repeat until the button is pressed again and the “RPT” indi- cation disappears from the display panel. Repeat Play mode will also be cancelled by activating the Shuffle Play cm or Track Scan cn functions.

cmSHUFFLE PLAYSELECTOR(SHF)

During disc play, press this button to play the tracks on the disc in a random shuffled order (“SHF” will appear on the display panel). In Shuffle Play mode, pressing the Forward Track Select ( + ) will also se- lect tracks in the random order instead of the normal progression. The first press of the Backward Track Select ( - ) will go back to the beginning of the track in play. Additional presses will select tracks in random order. The Shuffle Play mode can be cancelled by pressing the button again (“SHF” indication will dis- appear from the display panel) or by activating the Repeat Play clor Track Scan cnfunctions.

cnTRACK SCAN (SCN)

During disc play, press this button to play the first 10 seconds of each track on the disc (“SCAN” will ap- pear on the display panel). When a desired track is reached, press the Scan button again to cancel the function and play of the selected track will continue. Track Scan mode will also be cancelled by activating the Repeat Play cl , Shuffle Play cm , or Track Select bs functions.

co DISC EJECT ( )

Disc play is stopped, the disc is ejected and the unit will change to radio operation by pressing this but- ton. If the disc is not removed from the unit and the button is pressed again, the disc will be re-loaded and begin playing.

If the disc is not removed from the disc slot within 10 seconds of being ejected, it will automatically be re- loaded into the unit to prevent it from being acciden- tally damaged. Play of the disc can be resumed by using the CD Mode Selector bu to choose CD player function.

cp TIME/FREQUENCY SELECTOR (T/F)

This unit can be set so that either the clock time or radio frequency/CD player functions will normally ap- pear on the display panel. Pressing the Time/Fre- quency Selector button when the radio frequency or CD player track indication is shown will change the display to show the time. The time will then be the priority setting and the display will automatically re- turn to time display 5 seconds after any other radio, CD player, or audio function display.

If the unit is set to time display priority, pressing the Time/Frequency Selector button will change the dis- play to show the radio frequency/CD player indica- tion and this will then become the priority setting to which the display automatically returns 5 seconds after any other function is activated.

cqTHEFT-DETERRENT L.E.D.

Located on the chassis behind the front panel, a light- emitting diode (L.E.D.) will flash when the panel is removed. The flashing light serves as a visual warn- ing to the would-be thief that the unit has been dis- abled by removal of the front panel.

cr RE-SET BUTTON

A Re-Set button is located on the front of the chassis (front panel must be removed to access the button). The re-set circuitry is provided to protect the micro- processor circuitry and should only be activated un- der the following circumstances as it will erase the time and pre-set memories.

1.Upon initial installation after all wiring is completed.

2.After the position of the frequency step switch on the bottom of the chassis has been changed.

3.If there is a malfunction of any of the switches on the unit, pressing the Re-Set button may clear the system and return to normal operation.

cs FRONT PANEL RELEASE BUTTON

This button is used to release the mechanism that holds the front panel to the chassis. To detach the front panel, press the button so that the left side of the panel is released. Grasp the released side and pull it off of the chassis.

To re-attach the panel, position the right side of the panel in place first and then press the left side of the panel until the mechanism locks it into place.

OPERATINGINSTRUCTIONS

8