Connect Tech PCI-104 user manual

Page 30

Connect Tech FreeForm/PCI-104 User Manual

3) Browse to the directory containing the previously generated MCS file. Select and click “Open”.

4)The “FPGA SPI Flash Association” window will appear ; select “M25P16” (this is the flash device connected to the FPGA).

5) The flash will be added to the FPGA. Note that this flash is not part of the JTAG chain.

Revision 0.02

30

Image 30

Contents FreeForm/PCI-104 Limited Lifetime Warranty Copyright NoticeTrademark Acknowledgment Telephone/Facsimile Customer Support OverviewContact Information Email/InternetTable of Contents List of Tables List of FiguresProduct Features IntroductionAbout this manual FreeForm/PCI-104 Block Diagram System OverviewJumpers /Switches Description ComponentsReference Design Fpga Configuration Settings J1 Location Function Jumpers and SwitchesSlot Selection RSW1 Position Fpga Configuration Settings J1 Hardware DescriptionConnector Pinouts MTGRXN0112 RS-485 Port 2 Pinout P6 Signal Direction Gpio Header Pinout Signal Direction Gpio Header P7Side View External Power Connector P8 External Power Connector Pinout P8 Signal DirectionConnector’s Mating Components and Cables Hardware Installation Heat Sink InstallationStand-alone Operation PLX Software Development Kit SDK Software InstallationFpga Development Environment Reference Design & Application ExamplesFpga Configuration Power and Thermal Considerations Reference Design Fpga power analysisSpecifications Appendix a iMPACT Instructions for Fpga Configuration Launch ImpactPage Page Programming the Fpga Generating a Prom MCS File Page Revision Configuring the Fpga with the SPI Flash Configuring the Fpga / SPI flash AssociationPage Programming the Flash Elapsed time = Appendix B Power calculations Scenario 1 Heatsink attached, 250 LFMScenario 2 No Heatsink, 250 LFM Scenario 3 No heatsink, 0 LFM Appendix C Hardware Changes from Revision B DDR2 Pinout Reference DesignRevision B Local Clock Generation Revision CConnector Pinouts Hardware DescriptionRevision B Revision C Specifications Revision B Revision C Power RequirementsRevision B