Avaya MX10 manual Power source, Install two AA alkaline batteries and replace the door

P A R T

I

install in 5 easy steps

P L U G I N T O P O W E R S O U R C E

C O N N E C T T O P H O N E

A N D H E A D S E T

S E T D E FA U LT S E T T I N G S

S E T T E L E P H O N E / A M P L I F I E R C O M PAT I B I L I T Y S W I T C H

C O N N E C T T O A N

A U D I O D E V I C E

I N S T A L L A T I O N S T E P S

S T E P 1 plug into

power source

The AC power supply is shown installed and plugged in to a standard wall socket on the Installation Overview (see page v).

The Switcher amplifier requires power to work with most phones.

Power is not required for the Switcher when using:

•Avaya Merlin®, System 75/85 phones

•Avaya Definity® and 8400 series phones

Installing batteries

We recommend an AC power supply (included). Two AA alkaline batteries (not included) may also be used, but batteries will need to be replaced frequently.

1.Remove the Battery Access Door located on the side of the amplifier by placing your thumb on the door and pushing down.

2.Install two AA alkaline batteries and replace the door.

3.You will hear three “beeps“ through the headset when the batteries are low.

vi e n g l i s h 1