✎
❑m
CARE AND MAINTENANCE
Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit.
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent solution. Do not use strong solvents, such as alcohol, benzine or thinner.
To clean the heads and tape paths+ ❑
After evety 10 hours of use, clean the heads and tape paths with a head cleaning cassette or cotton swab moistened with cleaning fluid or denatured alcohol. (These cleaning kits are commercially available.)
When cleaning with a cotton swab @, wipe the recording/ playback head @, erasure head@, capstans@, and pinchrollers @.
After cleaning the heads and tape paths with a liquid head cleaning cassette or a moistened swab, wait until the cleaned parts are completely dried before inserting the tapes.
To demagnetize the heads
The heads may become magnetized after
Care of discs + E
●When a disc becomes dirty, wipe the disc from the center out with a cleaning cloth.
●After playing a disc, store the disc in its case. Do not leave the disc in places that are hot or humid.
SPECIFICATIONS
MAIN | UNIT |
|
| ||
cFM | tuner | section> |
|
| |
Tuning | range | 87.5 | MHz to 108 MHz | ||
Usable | sensitivity(lH~) | 13.2 | dBf | ||
Antenna | terminals | 75 ohms (unbalanced) | |||
cAM/MW | tuner section> |
|
| ||
Tuning | range | 531 kHz to 1602 kHz (9 kHz step) | |||
|
|
|
| 530 kHz to 1710 kHz (10 kHz step) | |
Usable | sensitivity | 350 pVlm | |||
Antenna |
|
| Loop | antenna |
<LW tuner section> Tuning range Usable sensitivity Antenna
<Amplifier section> Power output
(for K model)
144 kHz to 290 kHz
1400 pV/m
Loop antenna
u:
8 W + 8 W (1 kHz, T.H. D. 10%, 6 ohms) LH:
8 W + 8 W (6 ohms, T.H.D. 10’Yo)
K:
Rated: 6 W+ 6 W (60hms, T.H.D. 17., 1 kHz/DIN 45500)
Reference: 8 W + 8 W (6 ohms, T.H. D, 10O/., 1 kHzlDIN 45324)
DIN MUSIC POWER 16W+ 16 W
To be continued.
36