Pitney Bowes J693 manual

qEnter the Media Settings menu and verify that the correct ‘Sensor Type’ is rselected; see Section 4.1.1.

sExit the menu and return to READY mode.

Press and hold the FEED key until 2-3 labels are advanced (approximately 4 seconds) to set the TOF; see Section 5.1. If ‘Uncalibrated’, ‘Top of Form Fault’, or ‘Position Error’ is displayed go to Section 5.2.

Note: Start of print position changes can be made using the Print Control/Row Adjust or Row Offset (see Section 4.1.2).

40 J693